Draw walls, doors and windows

Updated November 19, 2026

Walls in Cloud CAD are real objects. Each one knows its thickness and height, joins the walls it meets, and holds its doors and windows. Drag a door along its wall and the opening follows, in the plan and the 3D view.

Draw walls

  1. Choose Wall on the left (it shares a button with Door and Window), or type WALL (WA) and press Enter.
  2. Click each corner, or point the way and type a length such as 10’4 and press Enter.
  3. Press Enter to stop, or type C to close the room back to the first corner.

The walls join at their corners by themselves: mitered where two meet, and stopped at the face of a wall they run into.

  • T sets the thickness (4½" interior, 6½" exterior, 8", or any size you type). Cloud CAD remembers it for the next walls.
  • J changes the line you draw by: the inside (left) face, the outside (right) face, or the center.
  • U takes back the last corner.

Put in a door or a window

  1. Choose Door (DR) or Window (WN).
  2. Move along a wall. Its distance to each corner shows as you go.
  3. Click to place it. The opening is centered where you click, and a door swings to the side of the wall you click on.

Before you click:

  • Type a width such as 32 and press Enter to change it.
  • For a door, K changes the kind (swing, pocket, barn or bifold) and H puts the hinge on the other end.
  • For a window, S sets the sill height.

Each door gets the next free mark (D1, D2…), and each window too (W1, W2…).

Change a wall, a door or a window

Click it and open Properties:

  • A wall: its thickness, height and layer. A new thickness grows away from the face you drew it by, so the room’s inside stays where it was.
  • A door: its width, kind, height and mark, Swing to the other side, and Hinge on the other end.
  • A window: its width, height, sill and mark.

To move things:

  • Drag a wall’s end grips to move its ends. The corners follow.
  • Drag a door’s or window’s grip along its wall, or onto another wall, and the opening moves with it. Move works too.
  • Delete a door or window and the wall is whole again.

Undo (Ctrl Z) takes back any of these in one step.

Schedules, Takeoff, 3D and DWG

  • Doors and windows are blocks with their mark, width and height, so door and window schedules and Takeoff count them. See Schedules and tables.
  • The 3D view stands the walls up with real openings for doors and windows. See The 3D view.
  • DWG and DXF files keep the walls as their outline and fill, and the doors and windows as blocks, so other CAD apps open the same plan. Opened again in Cloud CAD, they’re walls again.

Need more? Draw lines and shapes, or contact us.

Was this article helpful?