See your plan in 3D

Updated November 17, 2026

The 3D view builds a model from your floor plan as you draw. No AI, free, and it works offline.

Open it

Choose 3D at the top, or type VIEW3D (or 3D). In the desktop app it’s also View › 3D View.

What stands up

  • Lines on layers named with WALL become walls.
  • Layers named with GLAZ or WIND become windows: wall below the sill and above the head, glass between.
  • Layers named with DOOR become doors, with a header over the opening.
  • A floor goes under it all. Everything else stays flat on the plan.

Nothing on those layers yet? The view says so.

Look around

  • Drag to orbit, Shift+drag (or right-drag) to pan, and the wheel to zoom. On a touch screen, use two fingers.
  • Plan and 3D shows both side by side; 3D only fills the window.
  • Reset view goes back to the start. Close (or Esc) leaves.

Heights and export

  • Under Heights, set Walls (8’ to start), Window sill, Window head and Door head. They’re kept with the drawing, and Undo takes a change back.
  • Under Show, turn Glass and Floor on or off.
  • Under Export, save the model as glTF (.gltf) or OBJ (.obj) for other 3D apps.

Tips

  • Put walls, windows and doors on their own layers, named that way, and the model follows the plan.
  • If the browser can’t show 3D (WebGL is off), the view says so.

Need more? Layers, or contact us.

Was this article helpful?